Showing posts with label HTPC. Show all posts
Showing posts with label HTPC. Show all posts

Wednesday, 26 March 2014

Google Chromecast Review

This is an old post, preserved for reference.
The products and services mentioned within are no longer available.

Although it has been out in the states since last year, the Google Chromecast has recently been released in the UK.
The chromecast is basically an HDMI dongle which turns a less than smart TV into a smart TV, in a very usable way. Inside the box is the unit itself and a very minimal set of instructions for use.
Also included are other parts, a 5V mains adapter and USB - MicroUSB cable (required to power the unit) and an HDMI extension lead (optional to improve fit behind a TV and / or wifi reception).
That's basically it, put all those together and plug it in.
The unit then needs to be configured, so you take your phone, tablet or laptop and go to the website to get the appropriate software.
So the instructions on the box were all that was needed to get going, it all seemed to work without a problem, with only the wifi network details to setup. Once connected, my unit then went away and updated itself.
After that, it's just a case of pressing the 'chromecast' button on any supported app to transfer it to the TV. A good example is the Netflix app, your phone or tablet basically becomes the remote control for viewing content.
It's not that the movie is going from Netflix to the tablet and then to the TV, the tablet tells the chromecast what to do and it goes to Netflix itself and gets the content and shows it. All the tablet has to do is update the scroll bar and wait for you to press pause, so it can go to sleep and save power.
The only problem I had was having to wake up my Nexus 7 to move onto the next episode each time as I was binge watching House of Cards Series 2. (that and I didn't seem to be capable of taking decent photos of it in operation, sorry about that).

Tuesday, 24 April 2012

Asrock CIR Remote Demystified

This is an old post, preserved for reference.
The products and services mentioned within are no longer available.

A number of Asrock boards come with a 4 pin header labelled 'CIR'. The manual includes diagrams showing how to connect a special receiver using a front panel USB connector, but most boards do not come with the receiver or remote.

Since the device looked more than just an IR receiver, I had left those alone in the past, expecting they required that particular device to work correctly. However, I have recently purchased an Asrock Z68M-ITX/HT board which does come with a receiver.
At first glance this looks like a USB device, and indeed it does use a USB connector and plug into a front USB socket. But you are meant to move half of the front panel USB 10 pin connector so it takes in the CIR header and 1 of the USB ports.

Installing it doesn't show anything on lsusb on linux, and there is no new device detected under Windows  because it isn't USB. Inside are two standard 3 pin IR receivers, another sideways one and two SOT23 chips.
The two chips turn out to be AND gates, so it makes a quite neat little circuit, three active high IR receivers whose outputs are ANDed together to make a single active high IR signal. This is fed through to a Nuvoton W836x7HG CIR receiver, which is supported out of the box by LIRC in recent kernels (certainly works on my Mythbuntu 11.10 boxes). It is supported by the 'Acer Aspire 6530G_MCE' driver. I haven't gone through a full keymapping as yet, but most of the keys map to the Acer ones.

One very useful part of this is BIOS support of power on by CIR, so with the adapter in place and the BIOS option 'Power On By CIR' enabled, you can switch on the PC using the remote. Nice.

As good as it is, my main issue is that it isn't really convenient to have it hanging out of the front USB port.

So I thought I'd see how it worked wired direct to a standard TSOP4838 receiver. I wired one up using an old CDROM audio cable, with the ends de-pinned and rearranged appropriately.
This worked fine under test, but the receiver wasn't particularly solidly held in the socket so I soldered the device onto the cable.
I then glued it to a suitable gap behind the mesh on the front of the case.
The 4 pin connector goes on the CIR connector wired as follows:
1 - 5V (this should be at the same end as the red wires on the USB connector)
2 - IR RX (this is the active high output from the IR receiver)
3 - IR TX (this is not connected, but I presume this is for an IR transmitter?)
4 - 0V (this should be at the same end as the black wires on the USB connector)

Wednesday, 9 November 2011

Home Theatre PC

This is an old post, preserved for reference.
The products and services mentioned within are no longer available.

I have an existing HTPC that does fairly well with an Asus board with an Atom / Ion, and handles full HD acceptably well thanks to VDPAU support in MythTV. I now need another one, so I've been looking around at the options. The Atom / Ion boards are still there, as are the AMD Turion's as so on.

In looking around I found a few fairly reasonable Sandybrdige boards with the H61 chipset. This seems to be a cost reduced version of the H67, and is missing a couple of PCI Express lanes and SATA 6GB/s ports. So I looked at the 1155 process options and the until the Sandybridge Celerons are released, the Pentiums seemed to fit the bill, again fairly reasonably priced compared to the i3 series, but with a few features missing. The important ones like the onchip Intel HD graphics and the memory controller which gives Sandybridge such high memory bandwidth.

So I went for an Asrock H61M-ITX board and an Pentium G620 for just over £100, add 4GB of DDR3 memory and that took it to £120, which I think is less that the Atom board cost a couple of years ago. Performance wise I was very impressed, with better memory bandwidth scores than my i7 950!

I went for the same case as the previous one, a cheap unbranded ITX case with a 250W PSU. I quickly decided to make the same modifications to the case as with the previous one, namely getting rid of the two noisy fans. There is an 80mm fan on the front and a thin 80mm fan in the PSU.
The heatsink on the G620 gives a fair indication of the amount of heat likely to be generated, so I don't think they are both necessary. As the PSU fan is the 10mm thick variety I didn't want to replace it with the same type, so I used a normal 80mm fan outside of the PSU case, using the original mounting holes, but from the other side. The three pin fan header could then be connected as a chassis fan and speed controlled by the mainboard BIOS.
I also took the opportunity to remove the 3.5" hard drive cage as I was using a 2.5" SSD. Since the front fan was no longer present, I bolted the 2.5" SSD in its place, and also attached a couple of internal USB ports in front for the wireless keyboard / mouse receiver. It isn't the best, but putting it behind a big metal box doesn't help, so out in front, there is only plastic and air between it and the keyboard.
After a painless install of Mythbuntu 11.10, it found my myth backend and I was watching HD TV again in no time.